高原机场飞机噪声监测与计算结果比较分析

高原机场飞机架次较少,机型单一,飞行周期稳定,以及高原特殊的环境特征,有时会导致现场实际噪声监测数据无效。应用综合噪声模型(INM)软件对青海玉树机场飞机噪声进行计算,其结果与监测结果比较显示,计算值和监测值误差在±6 d B的范围以内。探讨提出采用飞机噪声计算模式,可以为高原机场飞机噪声管理提供可靠技术支撑。     

海南东环铁路（海口段）运行噪声预测研究

本文对海南东环铁路海口城区的南海大道附近的敏感点列车开通的近期（2020年）和远期（2030年）的噪声进行预测：根据噪声暴露声级与等效声级的关系公式,对列车加密后南海大道距离轨道30m处的噪声进行预测,发现当小时列车数达到14车次时,其昼问等效声级将超过70dBA的标准,为城区段控制小时列车次数提供参考。     

齐齐哈尔市建华区餐饮业噪声污染特点及防治对策

近年来城区餐饮业发展迅速,引发了一系列的环境问题。阐述了餐饮业噪声污染现状,产生污染的原因,并就如何解决这些问题提出了意见。     

Warm forming die design,Part II: Parting surface temperature response characterization of a novel thermal finite element modeling code

The majority of the research activities in the area of warm forming are concentrated on demonstrating or simulating the improved formability associated with forming lightweight materials such as aluminum alloys at elevated temperatures. However, the ability to design the proper thermal management system within the forming tool is a critical aspect to delivering this technology as a viable, stable production alternative to traditional stamping. This work begins to address the thermal stability issues of this process by examining the impact of process cycle time on the parting surface temperature response. Cycle times of 10, 15, 30, and 300 s were evaluated using a reciprocating surface and a self-heated experimental block of 1020 steel fitted with resistance cartridge heaters. The presented results indicate that cycle time does not significantly impact the steady-state temperature response at the parting surface for a well-insulated die that has proper thermal management. Parting surface experimental results were compared to values obtained numerically and through the use of the novel thermal finite element analysis software PASSAGE/Forming^®.     

公路项目环评中低时速单车噪声源强研究

由于缺乏低时速单车噪声源强估算模式,低等级公路项目噪声预测结果常与实际监测结果存在较大偏差。文中通过实测各车型车辆在低时速条件下时速和单车辐射声级(Lmax)数据,运用统计软件分析两者间的关系,并通过实测过往车辆数据进行验证。结果显示沿用《公路建设项目环境影响评价规范》(以下简称《06规范》)中的公式计算低车速源强可能会造成结果偏低,建议采用下列式子估算低车速单车噪声源强:小型车L=21.5 lgV+34.96(15≤V≤63),中型车L=10.4 lgV+59.29(15≤V≤53),大型车15≤V≤48(15≤V≤48)。     

水泥窑协同处置生活垃圾焚烧飞灰的汞排放特性及管控措施探讨

生活垃圾焚烧飞灰资源化利用主要途径之一是作为生产水泥原料。飞灰中富集了高浓度的汞、镉、铅等重金属。新型水泥窑的工艺特点导致高挥发性的汞无法固化在水泥熟料中,汞主要随烟气外排。当水泥窑处置飞灰规模较大、飞灰中汞含量较高时,如不采取控制措施,会导致水泥窑排放烟气中汞浓度超过标准限值。分别从机理分析、数据统计演算及实际检测结果多方面进行了验证,提出应加强对水泥窑协同处置飞灰过程中汞污染的认识及监督管理,探索有效的汞排放控制途径,确保汞排放达标。     

空调电机噪声污染的产生与控制研究

随着社会的不断进步和经济的高速发展,四大污染之一的噪声污染越来越不能被忽视.作为人们生活水平提高的标志之一的空调所产生的噪声,也越来越受到关注.长期受到噪声刺激,将导致听力损失,甚至引起心血管系统、神经系统及内分泌系统等方面的疾病.噪声污染不仅危害人们的健康,还影响人们的生活和工作.通过对引起空调电机噪声的原因进行分析,阐述了在电磁、机械和空气动力方面对设计和制造过程中能够降低电机噪声的方法,并简单介绍了噪声分析和隔消音的方法以降低噪声污染.     

The multiple communities of low-carbon transition: an assessment of communities involved in forest carbon measurement

In recent writing on sociotechnical transitions theory communities are mostly conceived of as being local and place-based (“grassroots”). In this paper the implications for sociotechnical transitions theory of having multiple communities operating at different geographical scales, and with different objectives, are examined through a case study of low-carbon innovation in forests. The focus of analysis is the communities promoting sociotechnical innovations in the measurement of forest carbon. Innovation is being driven by the international United Nations climate policy initiative “Reducing Emissions from Deforestation and forest Degradation” (REDD+). The rise of REDD+ policy has prompted a flurry of activity in related scientific research, especially in the field of remote sensing. But other types of community are also actively positioning themselves as experts in forest carbon measurement: there are multiple communities at work, each with varying claims to innovation and expertise, from local (place-based) forest communities to international communities of foresters and forest ecologists. Recognition of the multiple communities operating within sociotechnical systems usefully draws our attention to the politics of innovation.     

ATIS环境下驾驶员认知负荷研究进展

为构建更加符合驾驶员认知特性的出行信息环境,提高驾驶员出行信息服务水平,对ATIS环境下驾驶员认知负荷研究进展进行系统分析与评述.首先阐述了认知负荷的理论基础,随后分析了ATIS环境下驾驶员认知负荷的影响因素,同时分类解析了驾驶员内在认知负荷、外在认知负荷与相关认知负荷的产生根源,并对认知负荷的形成机理进行了分析;系统评述了驾驶员认知负荷的测量方法,最后基于驾驶员信息认知负荷提出了ATIS优化对策.结果表明:年龄、性别、受教育程度、月收入、出行经验是影响驾驶员认知负荷的主要因素;道路交通标志的版面设计与驾驶员的标志视认时间关联密切;驾驶过程中拨打手机及使用车载终端均会分散驾驶员注意力,增加驾驶员的信息认知负荷;较高的车速与音频播放等环境会对驾驶员的信息认知能力提出更高要求.     

PWM变频驱动电机轴电压与轴电流的测试方法

PWM变频器的广泛应用大大改善了电机调速性能,但是,由于PWM变频器共模电压在电机内部耦合电容作用下,形成轴电压和轴电流,会引起轴承早期失效危及系统安全运行。轴电流问题的研究包括对轴电流的分析、预测和抑制。然而这些过程需要轴电压和轴电流的准确测量进行验证和比对分析。设计合理而有效的测量装置和测量方法是非常重要的一环。在分析轴电流产生机理的基础上,对现有的各种轴电流测量方法和轴承阻抗特性测试方法进行介绍,总结对比这几种方法的优缺点,为轴电流的测试平台的新设计提供参考。